IEI Technology PPC2-C ADL Series, User Manual, Page: 43 / 87

PPC2-Cxxx-ADL Series Panel PC
Page 31
Figure 3-14: Mount the Chassis
Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective
cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top
panel of the panel PC. Carefully mark the location of the wall-mounting kit
screw holes on the wall. Drill a pilot hole at the marked location on the wall.
Secure the wall-mounting kit to the wall by inserting a retention screw into the
pilot hole on the wall. This step is to avoid the panel PC being pushed apart
from the wall-mounting bracket accidentally.
Figure 3-15: Secure the Chassis
Panel and Rack Installation
To mount the PPC-Cxxx-ADL panel PC into a panel, please follow steps 1-5.
For rack and cabinet installation, please follow Steps 1-7.
NOTE:
For the PPC-Cxxx-ADL panel PC, five mounting brackets must be
installed (three along the bottom and one along each side).