IEI Technology PPC-F12B, User Manual

Page: 72 / 151

PPC-F12B/15B/17B/19B-BTi Panel PC
Page 56
3.18.1 Keypad AP
Keypad AP is an OSD control tool developed by IEI. After the installation, the Keypad AP
can be accessed by clicking the icon on the notification area. It allows users to
control screen brightness and audio volume.
Figure 3-51: Keypad AP
3.19 IPMI Setup Procedure
The PPC-F12B/15B/17B/19B-BTi features Intelligent Platform Management Interface
(IPMI) that helps lower the overall costs of server management by enabling users to
maximize IT resources, save time and manage multiple systems. The
PPC-F12B/15B/17B/19B-BTi supports IPMI 2.0 through the optional iRIS-2400 module.
Follow the steps below to setup IPMI.
3.19.1 Managed System Hardware Setup
The hardware configuration of the managed system (PPC-F12B/15B/17B/19B-BTi) is
described below.
Step 1:
Install an iRIS-2400 module to the iRIS-2400 module slot (refer to
Section 3.9
).
Step 2:
Make sure at least one DDR3L SO-DIMM is installed in one of the SO-DIMM
sockets. If multiple SO-DIMMs are installed, all of the SO-DIMMs must be same
size, same speed and same brand to get the best performance.
Step 3:
Connect an Ethernet cable to the RJ-45 LAN port with
iRIS
label (
Figure 1-5
).