IEI Technology PPC-F12B-BT, User Manual

Page: 93 / 153

PPC-F12B/15B/17B/19B-BTi Panel PC
Page 77

115200 D
EFAULT
Sets the serial port transmission speed at 115200.

Data Bits [8]
Use the Data Bits option to specify the number of data bits.

7
Sets the data bits at 7.

8 D
EFAULT
Sets the data bits at 8.

Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.

None D
EFAULT
No parity bit is sent with the data bits.

Even The parity bit is 0 if the number of ones in the data
bits is even.

Odd The parity bit is 0 if the number of ones in the data
bits is odd.

Mark The parity bit is always 1. This option does not
provide error detection.

Space The parity bit is always 0. This option does not
provide error detection.

Stop Bits [1]
Use the
Stop Bits
option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.

1 D
EFAULT
Sets the number of stop bits at 1.

2 Sets the number of stop bits at 2.