IEI Technology PPC-F12B-BT, User Manual

Page: 144 / 153

PPC-F12B/15B/17B/19B-BTi Panel PC
Page 128

If considerable amounts of dust, water, or fluids enter the device , turn off
the power supply immediately, unplug the power cord, and contact the
PPC-F12B/15B/17B/19B-BTi vendor.

DO NOT :
o
Drop the device against a hard surface.
o
Strike or exert excessive force onto the LCD panel.
o
Touch any of the LCD panels with a sharp object
o
In a site where the ambient temperature exceeds the rated temperature
C.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
PPC-F12B/15B/17B/19B-BTi may result in permanent damage to the
PPC-F12B/15B/17B/19B-BTi and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PPC-F12B/15B/17B/19B-BTi. Dry climates are especially susceptible to
ESD. It is therefore critical that whenever the PPC-F12B/15B/17B/19B-BTi is opened and
any of the electrical components are handled, the following anti-static precautions are
strictly adhered to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.

Self-grounding : Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.

Use an anti-static pad : When configuring or working with an electrical
component, place it on an anti-static pad. This reduces the possibility of ESD
damage.

Only handle the edges of the electrical component : When handling the
electrical component, hold the electrical component by its edges.