IEI Technology PPC-3708, User Manual

Page: 96 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC
Normal D
EFAULT
Serial Port 2 mode is normal
IrDA
Serial Port 2 mode is IrDA
ASK IR
Serial Port 2 mode is ASK IR
Parallel Port Address [378]
Use the
Parallel Port Address
option to select the parallel port base address.
Disabled
No base address is assigned to the Parallel Port
378 D
EFAULT
Parallel Port I/O port address is 378
278
Parallel Port I/O port address is 278
3BC
Parallel Port I/O port address is 3BC
Parallel Port Mode [Normal]
Use the
Parallel Port Mode
option to select the mode the parallel port operates in.
Normal D
EFAULT
The normal parallel port mode is the standard mode
for parallel port operation.
Bi-directional
Parallel port outputs are 8-bits long. Inputs are
accomplished by reading 4 of the 8 bits on the
status register.
ECP
The parallel port operates in the extended
capabilities port (ECP) mode. The ECP mode
supports bi-directional communication between the
system and the parallel port device and the
transmission rates between the two are much faster
than the SPP mode.
EPP
The parallel port operates in the enhanced parallel
Page 96