IEI Technology PPC-3708 User Manual Download Page 129

Page: 129 / 161

PPC-3708/PPC-3710/PPC-3712 Panel PC

suspend mode

Resume on Ring [Disabled]

The

Resume on Ring

BIOS option specifies if the system will be roused from a

suspended or standby state when there is activity on the RI (ring in) modem line. That is,

the system will be roused by an incoming call on a modem.

Disabled D

EFAULT

Wake event not generated by an incoming call

Enabled

Wake event generated by an incoming call

Resume on Lan [Disabled]

The

Resume on Lan

BIOS option specifies if the system is roused from a suspended or

standby state when there is activity on the LAN.

Disabled D

EFAULT

Wake event not generated by LAN activity

Enabled

Wake event generated by LAN activity

Resume on PME# [Disabled]

The

Resume on PME#

BIOS option specifies if the system will be roused from a

suspended or standby state when there is activity on the PCI PME (power management

event) controller.

Disabled D

EFAULT

Wake event not generated by PCI PME controller

activity

Enabled

Wake event generated by PCI PME controller activity

Resume On RTC Alarm [Disabled]

The

Resume On RTC Alarm

determines when the computer is roused from a suspended

state.

Page 129

Summary of Contents for PPC-3708


































































































































































Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands

IEI Technology PPC-3708, User Manual

Search results

Summary of Contents for PPC-3708

Reviews:

Related manuals for PPC-3708

Brands by name

Popular brands