IEI Technology POS-6614, User Manual

Page: 95 / 236

POS-6614 Motherboard
Figure 4-4: Insert the Socket LGA775 CPU
Step 8:
Step 9:
Close the CPU socket. Close the load plate and engage the load lever by
pushing it back to its original position. Secure the load lever under the retention
tab on the side of CPU socket.
Connect the CPU 12V cable. After the cooling kit is installed, connect the
CPU cable to the CPU 12V power connector. Step 0:
4.4.2 Socket LGA775 Cooling Kit Installation
WARNING:
It is strongly recommended that you DO NOT use the original heat
sink and cooler provided by Intel on the POS-6614 motherboard.
The POS-6614 motherboard is vertically mounted on a horizontal
backplane and Intel’s heat sink does not come with a support bracket on
the soldering side, so the PCB may be bent by the weight of the cooling kit.
IEI’s CF-520 cooling kit includes a support bracket that is combined with
the heat sink mounted on the CPU to counter-balance the load on both
sides of the PCB.
Page 95