manualshive.com logo in svg

IEI Technology POS-6614, User Manual

Share
Download
IEI Technology POS-6614 User Manual Download Page 160

 

POS-6614 Motherboard

 

PS/2 Mouse Support [Enabled] 

Use the 

PS/2 Mouse Support

 option adjusts PS/2 mouse support capabilities. 

 

Disabled 

 

PS/2 mouse support is disabled and prevented from 

using system resources. 

 

Enabled D

EFAULT

 

Allows the system to use a PS/2 mouse. 

 

Auto 

 

The system auto-adjusts PS/2 mouse support. 

 

Wait For ‘F1’ If Error [Enabled] 

Use the 

Wait For ‘F1’ if Error

 option to specify how the system responds when the 

system detects an error on boot up. 

 

Disabled 

 

If there is an error when booting up, the system does not 

wait for user intervention but continues to boot up in the 

operating system. Only use this setting if there is a 

known reason for a BIOS error to appear. An example 

would be a system administrator must remote boot the 

system. The computer system does not have a keyboard 

currently attached. 

 

Enabled D

EFAULT

 

If there is an error during boot up, the system waits for a 

user to press “F1” and enter the BIOS to rectify the 

problem. The BIOS can then be adjusted to the correct 

settings. 

 

 

Page 160 

 

IEI® Technology, Corp

.

 

Summary of Contents for POS-6614













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands