manualshive.com logo in svg

IEI Technology POS-6614, User Manual

Share
Download
IEI Technology POS-6614 User Manual Download Page 117

 

 

Page 117

 

POS-6614 Motherboard

Key Function 

F10 key 

Save all the CMOS changes, only for Main Menu   

Table 5-1: BIOS Navigation Keys 

5.1.3 Getting Help 

When F1 is pressed a small help window describing the appropriate keys to use and the 

possible selections for the highlighted item appears. To exit the Help Window press E

SC

 or 

the F1 key again. 

5.1.4 Unable to Reboot After Configuration Changes   

If the computer cannot boot after changes are made to the system configuration, use the 

jumper described in 

Section

 

0

 to reset the CMOS defaults. 

5.1.5 BIOS Menu Bar   

The menu bar on top of the BIOS screen has the following main items: 

 

Main 

Changes the basic system configuration. 

 

Advanced

 

Changes the advanced system settings.

 

 

PCIPnP 

Changes the advanced PCI/PnP Settings

 

 

Boot 

Changes the system boot configuration.

 

 

Security 

Sets User and Supervisor Passwords.

 

 

Chipset 

Changes the chipset settings. 

 

Power 

Changes power management settings.

 

 

Exit 

Selects exit options and loads default settings

 

The following sections completely describe the configuration options found in the menu 

items at the top of the BIOS screen and listed above. 

Summary of Contents for POS-6614













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands