IEI Technology POS-6614 User Manual Download Page 112

Page: 112 / 236

Page 112

IEI® Technology, Corp

POS-6614 Motherboard

WARNING:

Selecting the wrong voltage will burn the LCD. Please check LCD technical

documents provided by the vendor for the correct voltage.

J_LVDS1 DESCRIPTION

1-2

(default)*

Set The Voltage Level Of Panel To VCC3

Short 2-3

Set The Voltage Level Of Panel To VCC

Table 4-7: LCD Voltage Select Jumper Settings

4.7 Chassis Installation

After the CPU, the cooling kit, and the DIMM modules have been installed and after the

internal peripheral connectors have been connected to the peripheral devices and the

jumpers have been configured, the motherboard can be mounted into chassis.

To mount the motherboard into a chassis please refer to the chassis user guide that came

with the product.

4.8 External Peripheral Interface Panel Connectors

4.8.1 Reset Button

Use the reset button to reset the system.

4.8.2 USB Connection

The external USB connectors provide easier and quicker access to external USB devices.

The external USB connector is a standard connector and can easily be connected to other

USB devices.

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands