manualshive.com logo in svg

IEI Technology POS-6614, User Manual

Share
Download
IEI Technology POS-6614 User Manual Download Page 105

 

POS-6614 Motherboard

Step 1: 

Step 1: 

Step 1: 

Step 1: 

Step 2: 

Connect the 6-pin connector end of an IrDA cable to the 

IR1

 header on the 

motherboard. Be sure to align pin 1 on the connector to pin 1 on the header.

Step 0:

 

4.5.13 LVDS Device Installation   

To connect an LVDS device to the motherboard, follow the instructions below. 

Connect the 30-pin connector end of a LVDS cable to the 

LVDS1

 miniature 

crimping connector on the motherboard. A keyed pin on the connector prevents 

it from being connected incorrectly.

Step 0:

 

4.5.14 Front Panel Connection   

The front panel connector provides connectivity to several external switches and 

indicators for monitoring and controlling the CPU board. See 

Section

 

3.2.9

 for the 

connector pinouts. 

4.5.15 PCI + PCIe Expansion 

The POS motherboard comes with one PCI +PCIe expansion slot. To connect an 

expansion card to the motherboard, follow the instructions below. 

Fit the PCI +PCIe card-edge of a PCI expansion card into the slot. The 

expansion card is keyed to prevent it from being inserted incorrectly.

Step 0:

 

4.5.16 SATA (Serial ATA) Connection   

The POS motherboard comes with two 7-pin SATA connectors. To connect a SATA 

device to the motherboard, follow the instructions below. 

Find the SATA and SATA power cables in the kit that came with the 

motherboard. 

Connect one end of a 7-pin SATA connector to a SATA connector on the 

motherboard. The SATA connector is keyed to prevent it from being inserted 

incorrectly. 

 

Page 105

 

Summary of Contents for POS-6614













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands