IEI Technology POS-6614 User Manual Download Page 104

Page: 104 / 236

POS-6614 Motherboard

Step 4:

Step 1:

Connect the other side of the cable to the HDD making sure that the pin 1 cable

corresponds to pin 1 on the connector.

Step 0:

Figure 4-11: Connection of IDE Connector

NOTE:

When two IDE disk drives are connected together, back-end jumpers on

the drives must be used to configure one drive as a master and the other as

a slave.

4.5.11 Inverter (LCD Backlight) Installation

To connect an Inverter (LCD Backlight) to the motherboard, follow the instructions below.

Connect the 5-pin connector end of the LCD backlight cable to the

INVERTER1

wafer connector on the motherboard. A keyed pin on the connector prevents it

from being connected incorrectly.

Step 0:

4.5.12 IrDA (Infrared Data Association) Device Installation

To connect an IrDA device to the motherboard, follow the instructions below.

Page 104

IEI® Technology, Corp

Summary of Contents for POS-6614













































































































































































































































Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands

IEI Technology POS-6614, User Manual

Search results

Summary of Contents for POS-6614

Reviews:

Brands by name

Popular brands