IEI Technology POC-17C-ULT3, User Manual, Page: 60 / 163

POC-17C-ULT3 Medical Panel PC
Page 45
3.13 Powering On the System
WARNING:
To avoid risk of electric shock, this equipment must only be connected
to supply mains with protective earth.
CAUTION:
The FSP PMP120-13-2 power adapter came with the POC-17C-ULT3
is a forming part of the medical device.
To power on the system, follow the steps below:
Step 1:
Connect the power cord to the power adapter. Connect the other end of the
power cord to a power source.
Step 2:
Connect the power adapter to the power connector of the POC-17C-ULT3.
Step 3:
Locate the power button on the rear panel.
Step 4:
Short press the power button to turn on the POC-17C-ULT3.
The user can also long-press the touch buttons on the front panel
for three seconds to power on the system (please refer to
Table 1-2
).
Step 0:
Figure 3-33: Powering On the System