IEI Technology PICOe-9452 User Manual Download Page 115

Page: 115 / 250

PICOe-9452 Half-size CPU Card

Page 97

Figure 5-14: 5.1 Channel Audio Kit

Step 4:

Mount the audio kit onto the chassis

. Once the audio kit is connected to the

PICOe-9452, secure the audio kit bracket to the system chassis.

Step 5:

Connect the audio devices

. Connect one speaker to the line-in audio jack, one

speaker to the line-out audio jack and a microphone to the mic-in audio jack.

Step 6:

Install the driver

. If the 5.1 channel audio kit is used, the ALC655 Realtek

codec driver must be installed. Refer to

Chapter 7

for driver installation

instructions.

Step 0:

5.6.4 7.1 Channel Audio Kit Installation

NOTE:

This is an optional item that must be ordered separately. For further

information please contact the nearest PICOe-9452 distributor, reseller

or vendor or contact an iEi sales representative directly. Send any

queries to

[email protected]

Summary of Contents for PICOe-9452



























































































































































































































































Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands

IEI Technology PICOe-9452, User Manual

Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands