IEI Technology PEMUX-XEW1, User Manual

Page: 58 / 115

PEMUX-XEW1
Page 44
Step 3: Insert the iRIS-2400 module. Push the module in at a 20º angle (Figure 4-2).
Step 4: Seat the iRIS-2400 module. Gently push downwards and the arms clip into
place (Figure 4-2). Step 0:
4.7 System Configuration
The system configuration should be performed before installation.
4.7.1 Clear CMOS Button
To reset the BIOS, remove the on-board battery and press the clear CMOS button
(J_CMOS1) for three seconds or more. The clear CMOS button location is shown in
Figure 4-3 .
Figure 4-3: Clear CMOS Button Location