IEI Technology PEMUX-XEW1, User Manual

Page: 56 / 115

PEMUX-XEW1
Page 42
Step 4: Connect the cooling kit fan cable to the CPU fan connector on the
PEMUX-XEW1. Carefully route the cable and avoid heat generating chips and
fan blades. Step 0:
4.5 DIMM Installation
To install a DIMM, please follow the steps below and refer to Figure 4-1 .
Figure 4-1: DIMM Installation
Step 1: Open the DIMM socket handles . Open the two handles outwards as far as
they can. See Figure 4-1 .
Step 2: Align the DIMM with the socket . Align the DIMM so the notch on the memory
lines up with the notch on the memory socket. See Figure 4-1 .
Step 3: Insert the DIMM . Once aligned, press down until the DIMM is properly seated.
Clip the two handles into place. See Figure 4-1 .
Step 4: Removing a DIMM . To remove a DIMM, push both handles outward. The
memory module is ejected by a mechanism in the socket. Step 0: