IEI Technology PCISA-MARK User Manual Download Page 151

Page: 151 / 224

PCISA-MARK CPU Card

BIOS Menu 9: Wake Up Events

VGA [OFF]

Use the

VGA

option to enable the system to monitor activity on the VGA display and rouse

the system from a suspend or doze state when activity on the VGA is detected.

Off

EFAULT

)

The system is not roused from a doze state or

suspend state when activity is detected on the VGA.

The system is roused from a doze state or suspend

state when activity is detected on the VGA.

LPT & COM [LPT/COM]

Use the

LPT & COM

option to enable the system to monitor activity on the LPT display

and serial ports and rouse the system from a suspend or doze state when activity on the

LPT display and serial ports is detected.

None

EFAULT

)

The system is not roused from a doze state or

suspend state when activity is detected on the LPT

display and serial ports.

Page 151

Summary of Contents for PCISA-MARK

































































































































































































































Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands

IEI Technology PCISA-MARK, User Manual

Search results

Summary of Contents for PCISA-MARK

Reviews:

Related manuals for PCISA-MARK

Brands by name

Popular brands