manualshive.com logo in svg

IEI Technology PCISA-LX, User Manual

Share
Download
IEI Technology PCISA-LX User Manual Download Page 130

 

 

Page 130 

 

IEI® Technology, Corp

.

 

PCISA-LX CPU Card 

5.7 PnP/PCI Configurations 

Use the 

PnP/PCI Configurations

 menu (

BIOS Menu 11

) to set the plug and play, and 

PCI options. 

BIOS Menu 11: PnP/PCI Configurations

 

 

PNP OS Installed [No] 

The 

PNP OS Installed

 option determines whether the Plug and Play devices connected to 

the system are configured by the operating system or the BIOS.   

 

No 

D

EFAULT

 

If the operating system does not meet the Plug and Play 

specifications, BIOS configures all the devices in the system. 

 

Yes 

 

Set this option if the system is running Plug and Play aware 

operating systems. The operating system changes the 

interrupt, I/O, and DMA settings. 

 

Reset Configuration Data [Disabled] 

Use the 

Reset Configuration Data

 option to reset the Extended System Configuration 

Data (ESCD) when exiting setup if booting problems occur after a new add-on is installed. 

Summary of Contents for PCISA-LX























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands