IEI Technology PCISA-LX, User Manual

Page: 118 / 214

Page 118
IEI® Technology, Corp .
PCISA-LX CPU Card
IT8888 ISA Decode Memory [Press Enter]
Press Enter to open the IT8888 ISA Decode Memory menu. The IT8888 ISA Decode
Memory options are shown in Section 5.5.2 .
IDE HDD Block Mode [Enabled]
If the drive connected to the system supports block mode, use the IDE HDD Block Mode
option to enable the system to detect the optimal number of block read/writes per sector
the system IDE drive can support. Block mode is also called block transfer, multiple
commands, or multiple sector read/write.
Disabled Block mode is not supported.
Enabled
D
EFAULT
Block mode is supported.
Onboard FDC Controller [Enabled]
Use the Onboard FDC Controller option to enable or disable the onboard floppy
controller. If the system is not connected to a floppy disk or uses an adapter for the FDD,
this option can be disabled.
Disabled The FDD controller is disabled.
Enabled D
EFAULT
The FDD controller is enabled.
Onboard Serial Port 1 [3F8/IRQ4]
Use the Onboard Serial Port 1 option to select the I/O address and IRQ for the onboard
serial port 1. The serial port can be disabled or the I/O address and the IRQ can be
automatically selected by the BIOS. The Onboard Serial Port 1 options are:
Disabled
3F8/IRQ4 (D
EFAULT
)
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto