manualshive.com logo in svg

IEI Technology PCISA-945GSE, User Manual, Page: 82 / 190

Share
Download
IEI Technology PCISA-945GSE User Manual Download Page 82

 

 

PCISA-945GSE CPU Card 

Page 64 

Step 3: 

Insert the cable connectors

. 

Once the cable connector is properly aligned with 

the 26-pin box-header connector on the PCISA-945GSE, connect the cable 

connector to the on-board connector. See Figure 4-10

.

 

 

Figure 4-10: LPT Cable Connection 

Step 4: 

Attach the LPT connector to the chassis

. To secure the LPT interface 

connector to the chassis please refer to the installation instructions that came 

with the chassis. 

Step 5: 

Connect LPT device

. Once the LPT interface connector is connected to the 

chassis, the LPT device can be connected to the LPT interface connector. See 

Figure 4-14

Step 5:

\

 

4.9.7 SATA Drive Connection 

The PCISA-945GSE is shipped with two SATA drive cables and one SATA drive power 

cable. To connect the SATA drives to the connectors, please follow the steps below. 

Step 6: 

Locate the connectors

. The locations of the SATA drive connectors are shown 

in 

Chapter 3

. 

Summary of Contents for PCISA-945GSE































































































































































































Reviews:

No comments