IEI Technology PCISA-945GSE, User Manual, Page: 65 / 190

PCISA-945GSE CPU Card
Page 47
Before and during the installation of the PCISA-945GSE DO NOT:
ƒ
DO NOT remove any of the stickers on the PCB board. These stickers are
required for warranty validation.
ƒ
DO NOT use the product before verifying all the cables and power connectors
are properly connected.
ƒ
DO NOT allow screws to come in contact with the PCB circuit, connector pins,
or its components.
4.2.2 Installation Checklist
The following checklist is provided to ensure the PCISA-945GSE is properly installed.
ƒ
All the items in the packing list are present
ƒ
A compatible memory module is properly inserted into the slot
ƒ
The CF Type I or CF Type II card is properly installed into the CF socket
ƒ
The jumpers have been properly configured
ƒ
The PCISA-945GSE is inserted into a chassis with adequate ventilation
ƒ
The correct power supply is being used
ƒ
The following devices are properly connected
o
Primary and secondary IDE device
o
SATA drives
o
Power supply
o
USB cable
o
Serial port cable
ƒ
The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
Keyboard
o
Mouse
o
USB devices
o
LAN cable
4.3 Unpacking
When the PCISA-945GSE is unpacked, please check all the unpacking list items listed in
Chapter 3 are indeed present. If any of the unpacking list items are not available please