IEI Technology PCISA-945GSE Page 155 User Manual Download

Page: 155 / 190

PCISA-945GSE CPU Card

Page 137

Figure 6-19: LAN Driver Installation Complete

Step 45:

Click

INISH

to exit the InstallShield Wizard (Figure 6-19).

Step 45:

6.6 Audio Driver Installation

There is no audio driver on the PCISA-945GSE. To add audio capabilities to the

PCISA-945GSE, connect a HD Audio kit or AC’97 audio kit available from IEI. Follow the

installation applicable to the installed audio kit.

6.6.1 AC’97 Driver Installation

To install the chipset driver, please do the following.

Step 46:

Access the driver list shown in Figure 6-3. (See

Section 6.2

)

Step 47:

Click “

4-Audio

”

Summary of Contents for PCISA-945GSE































































































































































































Search results

Summary of Contents for PCISA-945GSE

Reviews:

Related manuals for PCISA-945GSE

Brands by name

Popular brands

IEI Technology PCISA-945GSE, User Manual

Search results

Summary of Contents for PCISA-945GSE

Reviews:

Related manuals for PCISA-945GSE

Brands by name

Popular brands