IEI Technology PCISA-945GSE Page 143 User Manual Download

Page: 143 / 190

PCISA-945GSE CPU Card

Page 125

6.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

The following drivers can be installed on the system:

Chipset

VGA

LAN

Audio

iSMM

Installation instructions are given below.

6.2 Starting the Driver Program

To access the driver installation programs, please do the following.

Step 1:

Insert the CD-ROM that came with the system into a CD-ROM drive attached to

the system.

Summary of Contents for PCISA-945GSE































































































































































































Search results

Summary of Contents for PCISA-945GSE

Reviews:

Related manuals for PCISA-945GSE

Brands by name

Popular brands

IEI Technology PCISA-945GSE, User Manual

Search results

Summary of Contents for PCISA-945GSE

Reviews:

Related manuals for PCISA-945GSE

Brands by name

Popular brands