manualshive.com logo in svg

IEI Technology PCIE-9650, User Manual

Share
Download
IEI Technology PCIE-9650 User Manual Download Page 96

 

 

PCIE-9650 PICMG 1.3 CPU Card

Page 78 

 Note: 

IEI has a wide range of backplanes available. Please contact your 

PCIE-9650 vendor, reseller or an IEI sales representative at 

[email protected] or visit the IEI website (http://www.ieiworld.com.tw) 

to find out more about the available chassis. 

5.6.2 Backplane Installation 

Before the PCIE-9650 can be installed into the chassis, a backplane must first be 

installed. Please refer to the installation instructions that came with the backplane and the 

chassis to see how to install the backplane into the chassis. 

 NOTE: 

IEI has a wide range of backplanes available. Please contact your 

PCIE-9650 vendor, reseller or an IEI sales representative at 

[email protected] or visit the IEI website (http://www.ieiworld.com.tw) 

to find out more about the available chassis. 

5.6.3 CPU Card Installation 

To install the PCIE-9650 CPU card onto the backplane, carefully align the CPU card 

interface connectors with the corresponding socket on the backplane. To do this, please 

refer to the reference material that came with the backplane. Next, secure the CPU card to 

the chassis. To do this, please refer to the reference material that came with the chassis. 

5.7 Internal Peripheral Device Connections 

5.7.1 Peripheral Device Cables 

The cables listed in 

Table 5-3

 are shipped with the PCIE-9650. 

Summary of Contents for PCIE-9650







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands