IEI Technology PCIE-9452 User Manual Download Page 219

Page: 219 / 274

PCIE-9452 PICMG 1.3 CPU Card

Page 199

7.6 Realtek HD Audio Driver (ALC883) Installation

To install the Realtek High Definition (HD) Audio driver, please follow the steps below.

7.6.1 BIOS Setup

Step 1:

Enter the BIOS setup. To do this, reboot the system and press

during POST.

Step 2:

Go to the Southbridge Configuration menu. Set the

Audio Controller

option to

[Azalia]. See

Chapter 6

for details.

Step 3:

Press

F10

to save the changes and exit the BIOS setup. The system reboots.

Step 0:

7.6.2 Driver Installation

Step 1:

Insert the CD that came with the package.

Step 2:

From the main driver menu, navigate to

X:\4-AUDIO\AC-KIT883HD\Windows

(or other appropriate OS).

X:\

represents the system CD drive. A new window

appears showing the folder contents (

Figure 6-26

Figure 7-23: 4-AUDIO\AC-KIT883HD\Windows Folder

Step 3:

Double-click the

WDM_R140

icon to begin the driver installation process.

Summary of Contents for PCIE-9452



















































































































































































































































































Search results

Summary of Contents for PCIE-9452

Reviews:

Related manuals for PCIE-9452

Brands by name

Popular brands

IEI Technology PCIE-9452, User Manual

Search results

Summary of Contents for PCIE-9452

Reviews:

Related manuals for PCIE-9452

Brands by name

Popular brands