manualshive.com logo in svg

IEI Technology PCIE-9152, User Manual, Page: 143 / 194

Share
Download
IEI Technology PCIE-9152 User Manual Download Page 143

 

 

PCIE-9152 PCIMG 1.3 CPU Card 

Page 127 

 

Power Off 

 

The system remains turned off 

 

Power On 

 

The system turns on 

 

Last State 

D

EFAULT

 

The system returns to its previous state. If it was on, it 

turns itself on. If it was off, it remains off. 

 

AT/ATX Power [ATX] 

Use the 

AT/ATX Power

 BIOS option to select the power supply that is connected to the 

system. 

 

AT  

An AT power supply is connected to the system 

 

ATX D

EFAULT

 

An ATX power supply is connected to the system 

 

Resume on Keyboard/Mouse [Disabled] 

When enabled, the system will turn on when the keyboard or mouse are used. 

 Enabled 

 Disabled 

D

EFAULT

 

 

PME/LAN Resume [Disabled] 

When enabled, the system will turn on when a "magic packet" is sent to the system over 

the network. 

 Enabled 

 Disabled 

D

EFAULT

 

 

RI Resume [Disabled] 

When enabled, the system will turn on when a signal is received through the serial port. 

 Enabled 

 Disabled 

D

EFAULT

 

Summary of Contents for PCIE-9152



































































































































































































Reviews:

No comments