IEI Technology PCIE-9152 User Manual Download Page 109

Page: 109 / 194

PCIE-9152 PCIMG 1.3 CPU Card

Page 93

6.3.2.1 IDE Master, IDE Slave

Use the

IDE Master

and

IDE Slave

configuration menu to view both primary and

secondary IDE device details and configure the IDE devices connected to the system.

BIOS Menu 5: IDE Master and IDE Slave Configuration

Auto-Detected Drive Parameters

The “grayed-out” items in the left frame are IDE disk drive parameters automatically

detected from the firmware of the selected IDE disk drive. The drive parameters are listed

as follows:

Device

: Lists the device type (e.g. hard disk, CD-ROM etc.)

Type

: Indicates the type of devices a user can manually select

Vendor

: Lists the device manufacturer

Size

: List the storage capacity of the device.

LBA Mode

: Indicates whether the LBA (Logical Block Addressing) is a

method of addressing data on a disk drive is supported or not.

Summary of Contents for PCIE-9152



































































































































































































Search results

Summary of Contents for PCIE-9152

Reviews:

IEI Technology PCIE-9152, User Manual, Page: 109 / 194

Search results

Summary of Contents for PCIE-9152

Reviews: