IEI Technology PCIE-690AM2, User Manual

Page: 92 / 234

PCIE-690AM2 PICMG 1.3 CPU Card
Page 70
5.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
PCIE-690AM2 may result in permanent damage to the PCIE-690AM2
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the PCIE-690AM2. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the PCIE-690AM2, or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
Wear an anti-static wristband :- Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding :- Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad :- When configuring the PCIE-690AM2, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
PCIE-690AM2.
Only handle the edges of the PCB :- When handling the PCB, hold the PCB
by the edges.