IEI Technology PCIE-690AM2, User Manual

Page: 116 / 234

PCIE-690AM2 PICMG 1.3 CPU Card
Page 94
side of the connector. Step 0:
5.8.2 LAN Connection (Single Connector)
There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1: Locate the RJ-45 connectors . The locations of the USB connectors are shown
in Chapter 4 .
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the PCIE-690AM2. See Figure 5-16 .
Figure 5-16: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
5.8.3 PS/2 Y-Cable Connection
The PCIE-690AM2 has a PS/2 connector on the external peripheral interface panel. The
dual PS/2 connector is connected to the PS/2 Y-cable that came with the PCIE-690AM2.