IEI Technology PAC-400AI-C236, User Manual

Page: 24 / 110

PAC-400AI-C236 Embedded System
Page 14
3.1 Installation Precautions
During installation, be aware of the precautions below:

Read the user manual : The user manual provides a complete description of
the PAC-400AI-C236, installation instructions and configuration options.

DANGER! Disconnect Power : Power to the PAC-400AI-C236 must be
disconnected during the installation process. Failing to disconnect the power
may cause severe injury to the body and/or damage to the system.

Qualified Personnel : The PAC-400AI-C236 must be installed and operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs
may only be carried out by qualified personnel who are familiar with the
associated dangers.

Air Circulation : Make sure there is sufficient air circulation when installing
the PAC-400AI-C236. The PAC-400AI-C236’s cooling vents must not be
obstructed by any objects. Blocking the vents can cause overheating of the
PAC-400AI-C236. Leave at least 5 cm of clearance around the
PAC-400AI-C236 to prevent overheating.

Grounding : The PAC-400AI-C236 should be properly grounded. The voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the PAC-400AI-C236.
3.1.1 High Surface Temperature
WARNING:
Some surfaces of the equipment may become hot during operation.
The surface temperature may be up to several tens of degrees hotter
than the ambient temperature. Under these circumstances, the
equipment needs to be protected against accidental contact.
The equipment is intended for installation in a RESTRICTED ACCESS LOCATION.