IEI Technology NANO-ULT3, User Manual

Page: 112 / 148

NANO-ULT3 SBC
Page 98

Internal Graphics [Enabled]
Use the Internal Graphics option to enable or disable the internal graphics device.

Auto
The internal graphics device is automatically detected
and enabled.

Disabled
Disable the internal graphics device.

Enabled D
EFAULT
Enable the internal graphics device. The following
options/submenu appear with values that can be
selected:
DVMT Pre-Allocated
DVMT Total Gfx Mem
LCD Control

DVMT Pre-Allocated [256M]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can
then only be used as graphics memory, and is no longer available to applications or the
operating system. Configuration options are listed below:

32M

64M

128M

256M D
EFAULT

512M

DVMT Total Gfx Mem [MAX]
Use the DVMT Total Gfx Mem option to select DVMT 5.0 total graphic memory size used
by the internal graphics device. The following options are available:

128M

256M

MAX D
EFAULT