IEI Technology NANO-QM871-i1 User Manual Download Page 15

Page: 15 / 156

NANO-QM871-i1 EPIC SBC

Page 2

1.1 Introduction

Figure 1-1: NANO-QM871-i1

The NANO-QM871-i1 is an EPIC SBC with a 4

generation Intel® mobile Core™ i7/i5/i3

or Celeron® processor and Intel® QM87 Express Chipset. Storage on the board is

handled by two SATA 6Gb/s ports and one PCIe Mini socket for connecting a hard drive,

optical drive or SSD.

The NANO-QM871-i1 features Intelligent Platform Management Interface (IPMI) that

helps lower the overall costs of server management by enabling users to maximize IT

resource, save time and manage multiple systems. The NANO-QM871-i1 supports

IPMI 2.0 through the optional iRIS-1010 module.

The NANO-QM871-i1 has three types of graphics outputs that support triple independent

display. A VGA output connects to a VGA monitor. One LVDS connector supports

18/24-bit dual-channel display. Two HDMI connectors support up to 1920x1200 resolution.

Other connectors include RS-232 ports, RS-422/485 port, Gigabit Ethernet, USB 3.0 ports,

USB 2.0 ports, TPM, SMBus and digital I/O.

Summary of Contents for NANO-QM871-i1





























































































































































Search results

Summary of Contents for NANO-QM871-i1

Reviews:

Brands by name

Popular brands

IEI Technology NANO-QM871-i1, User Manual

Search results

Summary of Contents for NANO-QM871-i1

Reviews:

Brands by name

Popular brands