IEI Technology NANO-LX2, User Manual

Page: 88 / 183

NANO-LX2 EPIC NANO Motherboard
Page 72
Figure 5-9: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
5.6.3 Serial Device
The NANO-LX2 has a single female DB-9 connector on the external peripheral interface
panel for a serial device. Follow the steps below to connect a serial device to the
NANO-LX2.
Step 1: Locate the DB-9 connector . The location of the DB-9 connector is shown in
Chapter 3 .
Step 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 5-10.