IEI Technology NANO-LX2, User Manual

Page: 76 / 183

NANO-LX2 EPIC NANO Motherboard
Page 60
Before and during the installation of the NANO-LX2 DO NOT:
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
Use the product before verifying all the cables and power connectors are
properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the NANO-LX2 is properly installed.
All the items in the packing list are present
A compatible memory module is properly inserted into the slot
The CF Type I or CF Type II card is properly installed into the CF socket
The jumpers have been properly configured
The NANO-LX2 is inserted into a chassis with adequate ventilation
The correct power supply is being used
The following devices are properly connected
Primary and secondary IDE device
Audio kit
USB cable
The following external peripheral devices are properly connected to the
chassis:
VGA screen
Keyboard
Mouse
RS-232 serial communications device