manualshive.com logo in svg

IEI Technology NANO-HM650, User Manual

Share
Download
IEI Technology NANO-HM650 User Manual Download Page 132

 
 

 
 

NANO-HM650 EP IC S BC 

P a g e   117 

  NOTE: 

Use the following  commands to check if  the partitions were created 

successfully. 

 

S te p  6:

 

Press any key to exit the recovery tool and automatically reboot the system. 

Please continue to the following procedure: Build the Recovery Partition.

Step 

0

:

 

B.2.3

 

In s ta ll  Op e ra tin g   S ys te m ,  Drive rs   a n d   Ap p lic a tio n s  

Install the operating system onto the unlabelled partition. The partition labeled "Recovery" 

is for use by the system recovery tool and should not be used for installing the operating 

system or any applications. 

  NOTE: 

The operating system installation program may offer to reformat the 

chosen partition. DO NOT format the partition again. The partition has 

already been formatted and is ready for installing the new operating 

system. 

To install the operating system, insert the operating system installation CD into the optical 

drive. Restart the computer and follow the installation instructions. 

Summary of Contents for NANO-HM650
















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands