IEI Technology NANO-HM551 User Manual Download Page 16

Page: 16 / 162

NANO-HM551 EPIC SBC

Page 2

1.1 Introduction

Figure 1-1: NANO-HM551

The NANO-HM551 EPIC motherboard is a Socket G1 32nm Intel® Core™ i3, i5 and i7

processor platform. Up to one 4.0 GB 800 MHz or 1066 MHz DDR3 SDRAM SO-DIMM is

supported by the NANO-HM551.

The integrated Intel® HM55 Express Chipset supports two GbE LAN port through the dual

Realtek RTL8111E Ethernet controllers (with ASF 2.0 support). The NANO-HM551 also

supports two SATA 3Gb/s drives and provides 5 V SATA power.

The NANO-HM551 supports dual display via VGA, HDMI and an internal LVDS connector.

Eight USB 2.0 channels and one expansion PCIe mini socket provide flexible expansion

options. High Definition Audio (HDA) support ensures HDA devices can be easily

implemented on the NANO-HM551. Serial device connectivity is provided by three internal

RS-232 and one internal RS-232/422/485 connectors.

Summary of Contents for NANO-HM551



































































































































































Search results

Summary of Contents for NANO-HM551

Reviews:

Related manuals for NANO-HM551

Brands by name

Popular brands

IEI Technology NANO-HM551, User Manual

Search results

Summary of Contents for NANO-HM551

Reviews:

Related manuals for NANO-HM551

Brands by name

Popular brands