IEI Technology NANO-GX2, User Manual, Page: 99 / 172

NANO-GX2 EPIC NANO Motherboard
Page 83
Load Fail-Safe Defaults
Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS
parameter in the setup menus. Press F6 for this operation on any page.
Load Optimized Defaults
Use the Load Optimized Defaults option to load optimal default values for each BIOS
parameter in the setup menus. Press F7 for this operation on any page.
Set Supervisor Password
Use the Set Supervisor Password option to set the supervisor password. By default, no
supervisor password is set. To install a supervisor password, select this field and enter the
password. After this option is selected, a red dialogue box appears with “ Enter
Password: ”. Type the password and press E
NTER
. Retype the original password into the
“ Confirm Password: ” dialogue box and press E
NTER
. To disable the password, simply
press E
NTER
in the “ Enter Password: ” dialogue box, then press any key in the
“ Password Disabled !!! ” dialogue box.
Set User Password
Use the Set User Password option to set the supervisor password. By default no user
password is set. To install a user password, select this field and enter the password. After
this option is selected, a red dialogue box appears with “ Enter Password: ”. Type the
password and press E
NTER
. Retype the original password into the “ Confirm Password: ”
dialogue box and press E
NTER
. To disable the password, simply press E
NTER
in the “ Enter
Password: ” dialogue box, then press any key in the “ Password Disabled !!! ” dialogue
box.
Save & Exit Setup
Use the Save & Exit Setup option to save any configuration changes made and exit the
BIOS menus.
Exit Without Saving
Use the Exit Without Saving option to exit the BIOS menus without saving any
configuration changes.