manualshive.com logo in svg

IEI Technology NANO-GX2, User Manual, Page: 113 / 172

Share
Download
IEI Technology NANO-GX2 User Manual Download Page 113

 

 

NANO-GX2 EPIC NANO Motherboard 

Page 97

 

IDE HDD Block Mode [Enabled] 

If the drive connected to the system supports block mode, use the 

IDE HDD Block Mode

 

option to enable the system to detect the optimal number of block read/writes per sector 

the system IDE drive can support. Block mode is also called block transfer, multiple 

commands, or multiple sector read/write.   

 

Disabled 

 

Block mode is not supported. 

 

Enabled 

(D

EFAULT

)

Block mode is supported. 

 

Onboard Serial Port 1 [3F8/IRQ4]   

Use the 

Onboard Serial Port 1

 option to select the I/O address and IRQ for the onboard 

serial port 1. The serial port can be disabled or the I/O address and the IRQ can be 

automatically selected by the BIOS. The 

Onboard Serial Port 1

 options are: 

 

Disabled 

 

3F8/IRQ4 (D

EFAULT

) 

 

2F8/IRQ3  

 

3E8/IRQ4 

 

2E8/IRQ3 

 

Auto 

 

Onboard Serial Port 2 [2F8/IRQ3]   

Use the 

Onboard Serial Port 2

 option to select the I/O address and IRQ for the onboard 

serial port 2. The serial port can be disabled or the I/O address and the IRQ can be 

automatically selected by the BIOS. The 

Onboard Serial Port 2

 options are: 

 

Disabled 

 

3F8/IRQ4  

 

2F8/IRQ3 (D

EFAULT

) 

 

3E8/IRQ4 

 

2E8/IRQ3 

 

Auto 

Summary of Contents for NANO-GX2













































































































































































Reviews:

No comments