manualshive.com logo in svg

IEI Technology NANO-GX2, User Manual, Page: 110 / 172

Share
Download
IEI Technology NANO-GX2 User Manual Download Page 110

 

 

NANO-GX2 EPIC NANO Motherboard

Page 94 

 

OnBoard Audio [Enabled] 

Use the 

OnBoard Audio

 option to enable or disable the onboard codec. 

 

Disabled 

 

The onboard codec is disabled. 

 

Enabled 

(D

EFAULT

) 

The onboard codec is detected and enabled. 

 

Onboard USB 2.0 [Enabled] 

The 

USB 2.0 Controller

 BIOS option enables or disables the USB 2.0 controller   

 

Disabled 

 USB 

function 

disabled 

 

Enabled D

EFAULT

 

USB function enabled 

 

Onboard USB 1.1 [Enabled] 

The 

USB 1.1 Controller

 BIOS option enables or disables the USB 1.1 controller   

 

Disabled 

 USB 

function 

disabled 

 

Enabled D

EFAULT

 

USB function enabled 

 

Memory Hole At 15M – 16M [Disabled] 

The 

Memory Hole At 15M – 16M

 reserves the memory space between 15MB and 16MB 

for ISA expansion cards that require a specified area of memory to work properly. If an 

older ISA expansion card is used, please refer to the documentation that came with the 

card to see if it is necessary to reserve the space. 

 

Disabled D

EFAULT

 

Memory is not reserved for ISA expansion cards 

 

Enabled 

 

Memory is reserved for ISA expansion cards 

Summary of Contents for NANO-GX2













































































































































































Reviews:

No comments