IEI Technology NANO-945GSE2 User Manual Download Page 70

Page: 70 / 172

NANO-945GSE2

Page 56

[email protected]

or visit the IEI website (

http://www.ieiworld.com.tw

)

to find out more about the available chassis.

4.6.2 Motherboard Installation

To install the NANO-945GSE2 motherboard into the chassis please refer to the reference

material that came with the chassis.

4.7 Internal Peripheral Device Connections

The cables listed in are shipped with the NANO-945GSE2.

Quantity

Type

AT Power cable

Keyboard and Mouse cable

1 RS-232

cable

SATA drive cable

Table 4-8: IEI Provided Cables

Some optional items that can be purchased separately and installed on the

NANO-945GSE2 include:

ATX power cable

Dual port USB cable

Parallel port cable

RS-232

cable

RS-422/485

cable

SATA 5V power output cable kit for NANO series

SATA

power

cable

4.7.1 AT Power Connection

Follow the instructions below to connect the NANO-945GSE2 to an AT power supply.

Summary of Contents for NANO-945GSE2













































































































































































Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands

IEI Technology NANO-945GSE2, User Manual

Search results

Summary of Contents for NANO-945GSE2

Reviews:

Related manuals for NANO-945GSE2

Brands by name

Popular brands