manualshive.com logo in svg

IEI Technology NANO-945GSE2, User Manual

Share
Download
IEI Technology NANO-945GSE2 User Manual Download Page 37

 

 

NANO-945GSE2 

Page 23

The cooling fan connector provides a 12V, 500mA current to the cooling fan. The 

connector has a "rotation" pin to get rotation signals from fans and notify the system so the 

system BIOS can recognize the fan speed. Please note that only specified fans can issue 

the rotation signals. 

 

Figure 3-10: +12V Fan Connector Location

 

PIN NO. 

DESCRIPTION 

1 

Fan Speed Detect 

2 +12V 

3 GND 

Table 3-10: +12V Fan Connector Pinouts 

3.3.9 Front Panel Connector (8-pin) 

CN Label: 

F_PANEL1 

CN Type: 

8-pin header (2x4) 

CN Location: 

See 

Figure 3-11

 

CN Pinouts: 

See 

Table 3-11

 

The front panel connector connects to external switches and indicators to monitor and 

controls the motherboard. These indicators and switches include: 

Summary of Contents for NANO-945GSE2













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands