IEI Technology NANO-9453 User Manual Download Page 182

Page: 182 / 242

NANO-9453 EPIC Motherboard

Page 164

Boots Graphics Adapter [IGD]

Use the

Boots Graphics Adapter

option to select the graphics controller used as the

primary boot device. Select either an integrated graphics controller (IGD) or a combination

of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration

options are listed below:

IGD

EFAULT

PCI/IGD

Internal Graphics Mode Select [Enable, 8MB]

Use the

Internal Graphic Mode Select

option to specify the amount of system memory

that can be used by the Internal graphics device.

Disable

Enable, 1MB

1MB of memory used by internal graphics device

Enable, 8MB

EFAULT

8MB of memory used by internal graphics device

6.7.1.1 Video Function Configuration

Use the

Video Function Configuration

menu to configure the video device connected to

the system.

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands