IEI Technology NANO-9453 User Manual Download Page 153

Page: 153 / 242

NANO-9453 EPIC Motherboard

Page 135

Power Management/APM [Enabled]

Use the

Power Management/APM

BIOS option to enable access to the advanced power

management features. If this option is disabled, the only other option on the screen is the

Power Button Mode

Disabled

Disables the Advanced Power Management (APM)

feature

Enabled D

EFAULT

Enables the APM feature

Restore on AC Power Loss by IO [Last State]

Use the

Restore on AC Power Loss by IO

BIOS option to specify what state the system

returns to if there is a sudden loss of power to the system.

Power Off

The system remains turned off

Power On

The system turns on

Last State

EFAULT

The system returns to its previous state. If it was on, it

turns itself on. If it was off, it remains off.

Power Button Mode [On/Off]

Use the

Power Button Mode

BIOS to specify how the power button functions.

On/Off D

EFAULT

When the power button is pressed the system is either

turned on or off

Suspend

When the power button is pressed the system goes into

suspend mode

Summary of Contents for NANO-9453



















































































































































































































































Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands

IEI Technology NANO-9453, User Manual

Search results

Summary of Contents for NANO-9453

Reviews:

Brands by name

Popular brands