IEI Technology NANO-4386A2 User Manual Download Page 44

Page: 44 / 212

NANO-4386A2 Motherboard

Page 26

3.1 Anti-static Precautions

WARNING

Failure to take ESD precautions during the installation of the

NANO-4386A2 may result in permanent damage to the NANO-4386A2

and severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the NANO-4386A2. Dry climates are especially susceptible to ESD. It is critical

that the following anti-static precautions are strictly adhered to whenever handling the

NANO-4386A2 or any other electrical component.

Wear an anti-static wristband

- Wearing a simple anti-static wristband can

help to prevent ESD from damaging the NANO-4386A2.

Self-grounding

- Touch a grounded conducting material before handling and

periodically while handling the NANO-4386A2.

Use an anti-static pad -

When configuring the NANO-4386A2, place it on an

antic-static pad to reduce the possibility of ESD damage.

Only handle the edges of the NANO-4386A2 -

When handling the

NANO-4386A2, hold it by its edges.

Summary of Contents for NANO-4386A2





















































































































































































































Search results

Summary of Contents for NANO-4386A2

Reviews:

IEI Technology NANO-4386A2, User Manual, Page: 44 / 212

Search results

Summary of Contents for NANO-4386A2

Reviews: