manualshive.com logo in svg

IEI Technology KINO-QM770, User Manual, Page: 106 / 208

Share
Download
IEI Technology KINO-QM770 User Manual Download Page 106

 

 

KINO-QM770 Mini-ITX SBC

Page 90 

5.3.6 Intel(R) Rapid Start Technology 

Use the 

Intel(R) Rapid Start Technology

 menu to configure Intel® Rapid Start 

Technology support. 

Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 

Intel(R) Rapid Start Technology   

[Disabled] 

 
 
 
 
--------------------- 

ÅÆ

: Select Screen 

↑

 

↓

: Select Item 

Enter 

Select 

+  -   Change  Opt. 
F1 General 

Help 

F2 Previous 

Values 

F3 Optimized 

Defaults

F4 

Save & Exit 

ESC Exit 

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. 

BIOS Menu 8:

 

Intel(R) Rapid Start Technology

 

Î

 

Intel(R) Rapid Start Technology [Disabled] 

Use 

Intel(R) Rapid Start Technology

 option to enable or disable the Intel® Rapid Start 

Technology function. 

Î

 

Disabled D

EFAULT

 

Intel® Rapid Start Technology is disabled 

Î

 

Enabled  

Intel® Rapid Start Technology is enabled 

 

5.3.7 Intel TXT(LT) Configuration 

Use the 

Intel TXT(LT) Configuration

 menu to configure Intel® Trusted Execution 

Technology support. 

Summary of Contents for KINO-QM770

















































































































































































































Reviews:

No comments