IEI Technology KINO-QM57A, User Manual

Page: 81 / 160

KINO-QM57A Mini-ITX SBC
Page 67
Figure 4-16: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. See
6
Figure 4-16 .
Step 4: Insert a USB Series "A" plug . Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
6
Figure
4-16 . Step 0:
4.8.3 Serial Device Connection
The KINO-QM57A has a single female DB-9 connector on the external peripheral
interface panel for a serial device. Follow the steps below to connect a serial device to the
KINO-QM57A.
Step 1: Locate the DB-9 connector . The location of the DB-9 connector is shown in
Chapter 3 .
Step 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-17 .