IEI Technology KINO-HM551, User Manual, Page: 95 / 126

KINO-HM551
Page 83

Manual Mode The fan spins at the speed set in:
Manual Duty Cycle Setting
(Min=0, Max=100)
NOTE:
SYS fan functions are supported only when using a 4-pin fan. When
using a 3-pin fan, the functions are not supported.

First Boundary Temperature [60]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.

Minimum Value: 0°C

Maximum Value: 127°C

Second Boundary Temperature [50]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.

Minimum Value: 0°C

Maximum Value: 127°C