manualshive.com logo in svg

IEI Technology KINO-DBT Series, User Manual

Share
Download
IEI Technology KINO-DBT Series User Manual Download Page 14

 

 

KINO-DBT Mini-ITX SBC

Page 2 

1.1 Introduction 

Figure 1-1: KINO-DBT Series 

The KINO-DBT series is a Mini-ITX form factor single bard computer. It has an on-board 

22nm Intel® Atom™ or Celeron® processor, and supports two 204-pin 1333/1066 MHz 

dual-channel unbuffered DDR3 Low Voltage (DDR3L) SDRAM SO-DIMM with up to 

8.0 GB of memory.   

The KINO-DBT series includes one VGA port and one DVI port for dual independent 

display. It also has an internal DisplayPort (iDP) connector supporting HDMI, DVI, VGA, 

LVDS and DP monitors through the IEI converter boards. Expansion and I/O include one 

PCIe x4 slot (with PCIe x1 signal), one PCIe Mini slot supporting mSATA modules, two 

USB 3.0 ports plus two USB 2.0 on the rear panel, four USB 2.0 by pin header, two SATA 

3Gb/s connectors, five RS-232 serial ports, and one RS-422/485 connector. 

Summary of Contents for KINO-DBT Series






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands