IEI Technology KINO-DAL-E1W2, User Manual, Page: 114 / 151

KINO-DAL SBC
Page 100
5.4.1.2 LCD Control
Use the LCD Control menu ( BIOS Menu 18 ) to configure the display device connected to
the system.
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display
[Auto]
LVDS Panel Detect [Not Installed]
Panel Setting
Backlight Control Mode
[LED]
Backlight Control Type [DC]
Backlight Control Voltage Level [3.3V]
Select the Video Device
which will be activated
during POST. This has no
effect if external
graphics present.
Secondary boot display
selection will appear
based on your selection.
VGA modes will be
supported only on
primary display
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 18: LCD Control

Primary IGFX Boot Display [Auto]
Use the Primary IGFX Boot Display option to select the display device used by the
system when it boots. Configuration options are listed below.

Auto D
EFAULT

VGA1

LVDS1

HDMI1