IEI Technology KINO-DAL-E1W2, User Manual, Page: 82 / 151

KINO-DAL SBC
Page 68
4.7.1 LVDS Voltage Select Jumper
WARNING:
Permanent damage to the screen and KINO-DAL may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that came with the monitor to select the correct voltage.
The LVDS voltage selection jumper (J_PW1, p=2.00 mm) allows setting the voltage
provided to the monitor connected to the LVDS connector. Refer to Figure 4-18 and
Table 4-3 for the jumper location and settings.
Setting Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5 V
Table 4-3: LVDS Voltage Select Jumper Settings
Figure 4-18: LVDS Voltage Select Jumper Location